How does it work?
The unit is activated when the main battery has reached around 13.3V (26.6V at 24V) and allows excess power to be transferred from the primary charging system to charge / maintain an auxiliary battery bank. The transfer current is 3A at 12V.
Ideal for use on Boats, Camper vans and with Solar / Wind top up.
IP65 Waterproof (rated to)
Ignition protected and reverse polarity protected.
Power Saving. The battery maintainer uses FETs instead of relays and as such uses very little power itself (less than 1mA). This allows your solar harvest to be more efficiently distributed rather than lost across inefficient relays.
It is simple to install and is a low cost product. Saving time on installation and money on repeatedly replacing destroyed flat batteries.
12V to 12V
12V to 24V
24V to 24V
24V to 12V
|Offline power consumption||0.001A|
|Online power consumption||1mA|
|Activation voltage input battery (x 2 for 24V)||13.3V|
|High voltage trip on input battery (x 2 for 24V)||15V|
|high temperature lock down (Deg C)||80|
|Off Voltage and Standby input battery ( x2 for 24V)||12.9V|
|Reverse polarity protected (fuse)||12|
|Aux battery ‘low voltage’ warning LED on if aux bat below 12.6V and ‘off’ above 12.7V|
Battery maintainer / charger inc 1 metre of cable
|Input (V) DC||Output (V) DC||Current (A)||Size L x W x D mm||Weight Kg||Code|
|12||12||3||140 x 45 x 40||0.25||BM12123|
|12||24||1.5||140 x 45 x 40||0.25||BM12241|
|24||24||1.5||140 x 45 x 40||0.25||BM24241|
|24||12||3||140 x 45 x 40||0.25||BM24121|