Do you ever find yourself needing a multimeter, which you know you have somewhere and when you find it the batteries are flat? Well never again, this new product has no batteries so you can leave it as long as you like. Simply wind the handle two times for about 2 minutes use, or wind for about 10 seconds to get 10 minutes use. This product is high quality and extremely well equipped with all the features and functions required for general use.
Wind Up Multimeter (no battery)
| Code | WUVM |
| Winding | Wind twice for 2mins use, wind for 10s for 10 mins |
| Display | 46 mm x 23 mm large LCD |
| Measurement | AC, ACA, DCV, DCA, Ohms, continuity beeper, Hz, %, Cap |
| Dimensions | 152 x 78 x 45 mm |
| Weight | 350g |
| DC voltage | Range Volts 400.0 mV – 1000V DC Accuracy +/- ( 1% + 3d ) |
| Input impedance | 10 M Ohm |
| DC current measure | 400mA – 10A |
| Ohms | 400-40 M ohm |
| Capacitance | 40nF-100 mF |
| Frequency | 4 Hz – 4 MHz |
| Diode | ( forward voltage , VF ) |
| Range | 4 V DC |
| Resolution | 0.001 V |
| Test voltage | 1.6V DC |
| Test current | 1 +/- 0.6 amps |
| Includes red and black test leads plus instruction manual | |
| Continuity Beeper | |
| Overload Protection Fuse | |
| Beep if resistance less than 100 ohm | |
| Response time < 100 m | |
| Range selection Auto ranging with manual selecting. | |
| Data hold to freeze the display reading | |
