Built to IP68

12V 24V 36V 48V

Up to 28A-12V Input

The Pro Charge B is a fully epoxy encapsulated, plug and play, battery to battery charger. It is primarily designed to be put between the starter battery and an appliance battery (trolling / bow thruster / domestic). The charger puts a load on the alternator and converts that load into a 4 stage charging profile to provide fast and effective charging to the leisure/domestic batteries. The whole point of the charger is to charge your batteries up when you drive/cruise along by fully utilizing your on board alternator. The charger is best suited for alfresco use to fully utilize its weatherproof casing. Therefore, it tends to be at home on bass fishing boats charging the trolling motor bank – it can be used in a plethora of other places.


Boost / Reduce Charging. The Pro Charge B shall ensure your batteries get the correct charging profile for your batteries irrespective of high or low input voltage.

Up to 300W rating. Output charging at 12V, 24V, 36V and 48V. Input voltages at 12V and 24V.

Regenerative Braking friendly. This product can be used in vehicles with regenerative braking / smart alternators.

IP68, totally waterproof, fully en-capuslated can be submerged in water.

Battery Chemistry type selection. 6 battery chemistry types including AGM, Gel, sealed/flooded lead acid and LiFePO4.

Thermal power reduction, allows for short high power runs to maximise power transfer.

Multiple units can be used on the same installation.

Various activation modes. Automatic mode works from sensing voltage. Manual mode works from switch over ride. Regenerative braking mode the chargers stays on down to 12.2V.

Suitable for battery banks up to about 200Ah at 12V.

Pre-Wired and Pre-Fused cables. 1.5 m / 70 inches cable length.


Battery to Battery chargers / IP68 FULLY WATERPROOF

Input (VDC) Output (VDC) Input Current (A) Size L x W x D mm Weight Kg Code
12V 12V 25A* 230 x 135 x 65 3 BBW1220
12V 24V 25A* 230 x 135 x 65 3 BBW1224
12V 36V 25A* 230 x 135 x 65 3 BBW1236
24V 12V 13A 230 x 135 x 65 3 BBW2424
24V 24V 13A 230 x 135 x 65 3 BBW2412

* 25A for about 30 minutes then drops to about 18A on thermal restriction

Power Variant

12V 12V BBW1212, 12V 24V BBW1224, 12V 36V BBW1236, 24V 24V BBW2424, 24V 12V BBW2412

Filed under: