PCS
PCSPCS-1PCS-2PCS-4PCS-3PCS-6PCS-7PCS-5PCS-8PCS-9PCS-10PCS-11PCS-12PCS-box

Pro Combi S Pure Sine Wave Inverter

$1,821.57$2,743.42

Clear

Pure Sine Wave. Simulates domestic and shore power wave purity enabling any appliance to run from it. By stripping away all unnecessary functions the Combis are simple and provide a cost effective solution that meets the need of 90%+ of the consumer base.

30A automatic crossover switch: If shore power is connected to the combi the switch allows you to run your appliances from the shore power. However, when shore power is disconnected, the switch moves over to take current from the batteries. Switching time is 20ms.

Battery Charger sizes
40A – 100A (at 12V)

Charger only select option (on pure sine wave only). Allows unit to be set so in event of shore power failure the inverter does not engage.

Earth – Neutral bonding link when on inverter mode to comply with latest regulations. This allows RCD breakers to work.

Power Factor Corrected (PFC)

Features a power saver function.

Online Current consumption as low as 1.4A. Now fitted with new TX transformer results in 50% less quiescent current.

8 Battery type selectors. All with their own 4 stage charging profiles.

12V and 24V models
2500W
3500W

Remote Control with 10m cable switches unit on / off select / deselect power saver mode (standard with both Pure / Quasi)

Pro Combi S Pure Sine Wave 230V 50Hz Euro Standard

DC Voltage Power (W) Charger (A) Code
12 2500 80 PCS122500
12 3500 100 PCS123500
24 2500 35 PCS242500
24 3500 50 PCS243500

 

General Specifications

Specifications Euro USA
Input Wave Form: Pure Sine Wave Pure Sine Wave
Nominal Voltage: Input 230V AC Input 110V AC
Low Voltage Trip: 184V +/- 4% 92V +/- 4%
Minimum Engage: 194V +/- 4% 95V +/- 4%
High Voltage Trip: 253V +/- 4% 126V +/- 4%
High Voltage Re Engage: 243V +/- 4% 121V +/- 4%
Max input AC Voltage: 270V RMS 135V RMS
Nominal input frequency: 50Hz or 60 Hz auto detect 50Hz or 60 Hz auto detect
Low Frequency Trip: 47Hz for 50Hz, 58Hz for 60Hz 47Hz for 50Hz, 58Hz for 60Hz
High Frequency Trip: 53Hz for 50Hz, 62Hz for 60Hz 53Hz for 50Hz, 62Hz for 60Hz
Output Wave Form (on by pass mode) same as input (on by pass mode) same as input
Overload Protection: Circuit breaker Circuit breaker
Short Circuit Protection: Circuit breaker Circuit breaker
Transfer Switch Rating: 1500 – 2500W = 30A the 3500W = 50A 1500 – 2500W = 30A the 3500W = 50A
Efficiency on line Transfer Mode: 95%+ 95%+
Line Transfer Time: 20ms 20ms
Bypass without battery connected: yes yes
Max bypass current: 30 amps 30 amps
Bypass overload current: 35 amps: alarm 35 amps: alarm

 

Inverter specification output Euro USA
Output Wave Form: Pure Sine Wave Pure Sine Wave
Output continuous Power watts: Continuous 1500 / 2500 / 3500 Continuous 1500 / 2500 / 3500
Output continuous power VA:
Power Factor: 0.9 – 1.0 0.9 – 1.0
Nominal output Voltage RMS: 230V 115V
Max Voltage RMS: 260V 130V
Output Voltage Regulation: +/- 10% RMS +/- 10% RMS
Output Frequency: 50HZ +/- 0.3Hz or 60Hz +/- 0.3HZ 50HZ +/- 0.3Hz or 60Hz +/- 0.3HZ
Transient Response Time: <150ms; 0% to 100% RCD load <150ms; 0% to 100% RCD load
Nominal Efficiency: >88% >88%
Surge Ratings: PQS1500 = 4500VA,  PQS2500 = 7200VA PQS1500 = 4500VA,  PQS2500 = 7200VA
Online current consumption at 12V/24V: 12V 1.2A, 24V on 1500 – 2500 sine,  4.5A for 3500 unit 12V 1.2A, 24V on 1500 – 2500 sine,  4.5A for 3500 unit
Power Saver Mode Current Consumption: 12V 0.4, 24V 0.2 12V 0.4, 24V 0.2
Short circuit Protection: yes, less than 3 cycles yes, less than 3 cycles

 

Inverter specification input Euro USA
Nominal Input Voltage: 12V or 24V depending on model 12V or 24V depending on model
Minimum Start Voltage: 10V for 12V models, 20V for 24V models 10V for 12V models, 20V for 24V models
Low Battery Alarm: 10.5V for 12V models, 21V for 24V models 10.5V for 12V models, 21V for 24V models
Low Battery Trip: 10V for 12V models, 20V for 24V models 10V for 12V models, 20V for 24V models
High Voltage Alarm: 15.5V for 12V models, 30V for 24V models 15.5V for 12V models, 30V for 24V models
Power Saver: Below 20 Watts when enabled Below 20 Watts when enabled
Power Saver: Can be switched on/off with remote control Can be switched on/off with remote control

 

Charger Mode Specification

Input Voltage Range: 196-245V 96-130V
Output Voltage: Dependant on battery type selection Dependant on battery type selection
Output Current 12V Model: 1600 – 40A, 2500 – 55A 1600 – 40A, 2500 – 55A
Output Current 24V Model: 1600 – 20A, 2500 – 25A 1600 – 20A, 2500 – 25A
Battery Initial Voltage for Start Up: 0 – 15V x2 for 24V 0 – 15V x2 for 24V
Over Charge Protection Shutdown: 15.7 12V x2 for 24V 15.7 12V x2 for 24V
Power Variant

12 2500, 12 3500